Uploaded on Dec 3, 2011
This video will help get you started. You will need 2 3′ oak dowels, a bayonet or good knife, a steel pipe, some lead, glue, rubber, apoxy and a few other odds and ends. This video addresses how to select a good piece of oak to use.
Building A Tactical Walking Stick 2
Building A Tactical Walking Stick 3
Building A Tactical Walking Stick 4
Building A Tactical Walking Stick 5
Building A Tactical Walking Stick 6
Building A Tactical Walking Stick 7
Building A Tactical Walking Stick 8
Uploaded on Dec 4, 2011
In this video I trim the bolts holding the haft to the handle. Trim the end of the scabard, trim the opening and get the Spring Latch to catch and start working.
Building A Tactical Walking Stick 9
Building A Tactical Walking Stick 10
Uploaded on Dec 4, 2011
Steel capped and lead packed! This video shows how I drill out the club/scabbard and build a steel cap for it. I heated the cap, pounded it on and cooled it with water. Almost done Y’all, just 5 more to go!
Building A Tactical Walking Stick 11
Uploaded on Dec 4, 2011
In this video I show how to sew the leather on the handle for the grip. Continues into the next video also showing covering the latch.
Building A Tactical Walking Stick 12
Uploaded on Dec 4, 2011
This video continues sewing the leather onto the scabard side. Showing how I used a leather flap to conceal the Spring catch for the bayonet blade.
Building A Tactical Walking Stick 13
Uploaded on Dec 4, 2011
This video shows how I resharpened the blade first useing my disc grinder, then a belt sander, stones, diamond stones and finaly a silicone stone. It got fairly sharp.
Building a Tactical Walking Stick 14, Done!!!
